04 August 2009

Monoprinting?

First try. Not bad, considering how poorly the next several turned out. I taped a pattern to a sheet of glass, and painted the design on the other side of the glass in watercolor. I tried to pull the print by placing heavy things on top of it all, with the paper being wet enough, I thought, to suck up the paint, most of which had already dried. This *might* have worked if I'd rubbed the paper with a smooth thing, instead of letting it sit--the paper tore a bit when I peeled it up, because it had adhered to the glass, instead of just taking the paint and running off with it.


This is the 2nd try. The paper was FAR too wet, and the paint was... unwilling. After this, I decided I should probably just go read about how to make watercolor monoprints at home without any print equipment, instead of screwing around wasting a lot of time, energy, paint, and paper. Oh, and enthusiam. For reasons I can't guess, I'm really into this idea right now.


After doing a bunch of reading about how watercolor monoprints can be made, I tried a few of the recommendations. All together. On one plate. As you can see, it made a relatively uniformly unattractive print. Those recommendations were: a thin base layer of hand soap as a release agent, rub the paper by hand for the transfer, use paper designed specifically for watercolor paint. Although totally uncool, it encouraged me anyway. I'm easy, I guess.


A print to give me hope! Water-based pens on the left, water soluble/watercolor crayon on the right. The unevenness of the transfer comes from me using a bone folder tool to rub the transfer over. If you click through to the full size pic, you'll see how that's not a very good way to lay the color down, even if it seemed good at the time. I don't have a brayer, or a rolling pin, or anything. Outsider art, baybee!


This is the first really successful test. The big pink blob is from the paper being a little too wet, but that also was informative. The ghost image at the top is a 2nd pull from the original drawing with easy-wash-out kid's pens. The really vibrant bits of this were added in after I pulled the print, with those same pens. The actual base print was made with watercolor crayons, though.

2 comments:

Regan said...

Doh. When I read your reaction to the first one, I immediately thought "bone folder." I thought wrong, eh? At least I'm in good company.

Holly said...

Actually, you were right. And you probably thought of it faster than I did. The problem I had with that print (the one with the drop-out stripes) is that I wasn't methodical enough with the folder. Other things might work as well or better... but I don't have any of them.