Recent Works On Paper. With Paper. Whatever.

Various permutations of block printing and embossing. The embossing made my brain tingle a little more than the printing, but where they are combined, that was pretty sweet, too. Not as easy to see in these photos, which were made with a telephone.

A heap of attempts. Some were more rewarding than others. It is difficult to tell if the ink is dorked, it was just too hot in the studio, or I don't know what I am doing. Or, you know, All of the Above.

These are cool enough, I figure they deserve large size! The two images were made from the same embossing plate, but the 2nd one had more carving done to it before going through the press. 

The purple is the same plate, block printed. I think this was one of the first prints I pulled with block printing ink. I tried intalio first to see if I liked it (yeah, yeah, I *know* that is not correct usage!) and I did like it, but the photos of those prints are pretty much impossible to decipher. 

Old Dog / New Tricks

Took a two evening advanced course in acrylic abstract painting, with emphasis on landscape rendering. I went with a water theme, probably because I'd been listening to The Odyssey audio book all afternoon...

Although that style of painting does not especially interest me, the techniques presented did, and the instructor did a fine job of explaining them.

My canvas was, sadly, too small to try them all out at once, as most of them rely on allowing thin layers of paint dry between applications. Obviously this is tough with a small canvas! You can only get so far away from what you've just painted. Everyone else in the class was working with one or more canvasses in the 2'x3' size range, for the most part.

Here is the canvas I painted during class. Currently I have a couple of watercolors in progress, but when I have finished those, I am going to start some acrylic paintings. It seems that having a couple of canvasses going simultaneously is the cure for waiting, and I love trying new stuff. I did come out of the classes feeling pretty inspired to try these techniques, and full of ideas about how to put them to good use.

I admit it was hard not to giggle when several of the other course participants extended sincere sympathy to me, as an apparently obvious total beginner to painting. I took the small canvas (about a foot square) because I've not been feeling well lately, and didn't have a lot of energy for a large painting -- and I *hate* unfinished paintings. Also, carrying it to class and back home in the freezing damn cold on foot kinda sucks. $5 says everyone else in the class came in a car. Since I'd been doing watercolors during the day both days, I ended up painting the acrylic left-handed to give my right a break. Didn't really get into any of that with the other people in the class, though. I was just happy to be there.

There is a summer course, 3 days somewhere north of here, that I will probably sign up for, if I can work out transportation, and get registered before all the spots fill. It does look like fun.

partial credit, I demand it!

Tried to post this stuff a few days ago, did not manage to do so, and decided to post it now, before I forget again for the rest of eternity. Of course, it's a holiday, so probably no one will see it. C'est la Vie!


So.... these photos are stubborn about placement! Wow.



This tiny strip is actually a fabric thing about five feet long, maybe a foot wide. The black silhouette region was printed by IKEA, I'm filling in the colors myself. I stitched all around where the black meets the white, because I'm going to fill it with pillow stuffing and turn it into a sort of low relief type thing.

All these sheets are watercolor paintings I did three years ago. I'm getting them into mat board finally this week, as I'm taking everything I can carry with a reasonable expectation of not damaging it, and trying to sell stuff at the flea market this weekend. Hoping the holiday shopping frenzy is in full swing.



Most of what's kept me busy since then has been the framing stuff. Today I matted six of the large pieces, and prepped a bunch more for tomorrow. It's amazing how long this stuff takes me. I think I might move a little faster if I work on a lower work surface (will try it tomorrow), but they sure look nice when they're done. I even shelled out for the nice poly sleeves to put them in. Pics coming real soon! Trying not to get distracted, but if I get actual daylight during the day tomorrow, then pics tomorrow.

How These Things Begin (sort of)

Here's my sketch for the 16 windows of the
previous few posts. It's kind of similar, and
kind of ... gestural. Doing the drawing functioned more to give me the sense of what kind of lines I wanted the frames to have, than to give me the precise shapes for each of the 16 windows.

In some ways this stuff would all be easier if I were the type to plan my projects out to the last and tiniest detail before beginning to execute, but I have tried that in the past, and invariably been horribly, horribly frustrated. Because when I plan that way, I give myself no leeway for adapting to the unexpected. Materials or processes that don't work out quite as planned. When I do that much planning, I damn well expect it to work out like that!

On the other hand, when I do it this looser way, just kind of rolling with the ideas as they come, I tend to change course a bit *too* much, whether things are working or not, and I tend to waste time and effort and often materials. In this method, I have to be very careful to set firm deadlines and I have to set budget limitations, material limitations, and lock down how many changes I let myself make along the way. Project managing, basically. That turns into a tough line to toe, because it wars with my desire not to stifle creative urges. (The alternative being, frustration because my creative urges make it flat out impossible to get anything done, ever.)

Step 1 - Collect all the underpants!

I've just finished the scrollwork for a picture frame I've been wanting to make for a while. I don't think this is the frame I originally dreamed of, but it will be cool anyway. And I can always make more! I like this very much, although it is pretty far from done. Next time I'll probably keep track of how many hours go into something like this. I didn't this time, but I know it was *many*.

That's 4 pieces of thin plywood that were stacked up and staples driven into the edges. The design was applied to the top layer, and I drilled holes to feed the saw blade into the interior of each enclosed space to cut out, starting with the smallest / furthest inside first, and working my way out. The last step was to cut the outsides, gradually replacing staples with tape so the stack would stay in alignment.

The roundy thing in the center, below the flash glare is a quarter, for size reference. Next step.... paint it, I think. Then paint something to glue it to.

Progress continues!

MacBook for size reference!

I finished cutting out the individual pieces of this today. As of this moment, the plan is to shape and refine the blocks a bit before affixing them to something else. Probably another piece of wood, if I had to make a random guess. Most likely use the Dremel and other things to do the shaping. Haven't decided yet about finishing. Since it's plywood, there isn't going to be a lot of point in highlighting the wood's natural beauty, so paint might be the order of the day. If I really feel like doing a LOT of sanding, I might go for some glossy lacquer type thing.

And, yeah, before you sharp-eyed folks even ask, it is the same knot as on that painting from a couple of months back. I really like this one.

New saw, new project, new hopes and dreams.

New saw showed up yesterday, new project started today. I'm having fun, and looking forward to seeing how this turns out. I don't know why, but it really amuses me that the saw has a pictogram of a person reading a book. This must be my saw....

ETA - already had to play a round of Digging Through The Vacuum Bag To Find That Piece I Didn't Mean To Suck Up But Did. I hope I don't have to play THAT game again any time soon. Yech.

OK, so I lied.

Weeks ago, I made a noise about uploading some pictures of my recent design projects. And then I didn't do it. This should come as no surprise to anyone who has been keeping up with this blog...

Anyway, I took a bunch of pictures today, and as it always does, that made me want to work on some projects I'd done designs for and not actually made an object with.

The picture here is a sheet of embossing foil that I've drawing a bit of knotwork on/into. It's far too flimsy to do anything with, and also I've poked a bunch of holes it in with my embossing stylus. (Not to be confused with an out-of-ink ballpoint!)

Anyway, while I was playing with that, I figured it might be fun to make some kind of low relief thing like this, and then fill it with wax or plaster, making a small shiny object. I did some trials, to test the level of detail and so on, and even poured wax in, and got some small shiny objects out. So there is definitely more coming on that front. However--there are no pictures of that trial run, because I tossed all the 'evidence' in the trash. Scented votive candles are not the right source of wax for this kind of thing.

This was sort of meant to be a bookmark or something, but I'm not satisfied with it, so, it's probably going on the vast heap of Projects Which Taught Me Valuable Lessons About Something.

Framing for fun

One of my current projects is a frame. I got a calendar this year that needs one. Here is the rough sketch. It will probably not look so much like this when it is done, but this is the concept I'm starting from.

Have not yet decided whether to make it brightly colored or monochrome.